One for Two 840W Medical Silent Air Compressor

In the process of dental restoration, dental compressors are usually used when dental filling equipment is used for filling teeth and filling dental materials. The dental drill is used for dental drilling and removal of corrosive substances. As a Class II medical instrument, it has very high quality requirements. The dental compressor is a kind of treatment equipment often used in the stomatology department. The compressed air enters the car head from the intake pipe, and the pressure is about 2.5 bar to the dental chair. The NSK high-speed turbine dental drill hand machine rotates at a speed of 300000 rpm. It is driven by pure compressed air to drive the turbine to rotate at a high speed, Drive the needle fixed in the upper and lower cards of the turbine to rotate at a high speed, and the gas is discharged from the machine head through the exhaust pipe.

The dental compressor is in the handpiece, and its lower part is the channel for cooling water. The water flows into the cavity below the handpiece from the right side, and then sprays out from two spray holes to cool the handpiece. If there is condensed water in the air, the pneumatic bearing will get rusty and stuck. Ruitian SF4 oil-free and water free dentist dedicated oil-free air compressor all-in-one machine helps dental clinics reduce the failure rate of mobile phones!

Dental compressor uses a dental drill to remove the diseased tissue of dental caries, and "polish" the caries site into a caries cavity that can be filled with good materials and finally achieve the use effect. Before refilling the material, the cavity should be thoroughly disinfected to prevent further caries.?

The filling materials shall be prepared and filled into the caries cavity, and the contour shall be carved immediately. Attention shall be paid to removing the part that is too high beyond the occlusal surface to avoid iatrogenic occlusal trauma. Most common filler materials contain water as solvent and need to be dried during use.??

The three use guns are used for water spraying, air spraying and spray. They are often used to clean the residue on teeth, and also to air dry teeth. If the tooth is filled, the tooth must be dry before filling the material. Generally, compressed air will be used to blow it dry.

1. One driven one dental chair electric air compressor

2. Powerful, low-noise, 32L silent air compressor

3. The air tank is made of 3mm thick steel, solid and safe

4. Metal water inlet pipe, durable, fast heat dissipation

5. It conforms to safety standards, is not easy to heat up, and is more safe

6. Effectively prolong the service life of the handpiece

Dental compressor features:

The air receiver of dental compressor is made of 3mm steel, which is firm and safe.

Dental compressor, perfect welding technology and exquisite painting processing technology meet the process requirements.

The performance is stable, and the noise meets the requirements for gas supply in quiet places.

The power cord with copper wire diameter ensures compliance with safety standards, less heating and more safety control.

The inner tube is made of metal, with fast heat dissipation and durability.

characteristic:

The air receiver is made of 3mm thick steel, solid and safe; The solenoid valve and capacitor have built-in motor base to avoid damage during transportation; Stable performance, and the noise meets the requirements of gas supply in quiet places; The solenoid valve and capacitor have built-in motor base to avoid damage during transportation

　One for Two 840W Medical Silent Air Compressor

In the process of dental restoration, dental compressors are usually used when dental filling equipment is used for filling teeth and filling dental materials. The dental drill is used for dental drilling and removal of corrosive substances. As a Class II medical instrument, it has very high quality requirements. The dental compressor is a kind of treatment equipment often used in the stomatology department. The compressed air enters the car head from the intake pipe, and the pressure is about 2.5 bar to the dental chair. The NSK high-speed turbine dental drill hand machine rotates at a speed of 300000 rpm. It is driven by pure compressed air to drive the turbine to rotate at a high speed, Drive the needle fixed in the upper and lower cards of the turbine to rotate at a high speed, and the gas is discharged from the machine head through the exhaust pipe.

The dental compressor is in the handpiece, and its lower part is the channel for cooling water. The water flows into the cavity below the handpiece from the right side, and then sprays out from two spray holes to cool the handpiece. If there is condensed water in the air, the pneumatic bearing will get rusty and stuck. Ruitian SF4 oil-free and water free dentist dedicated oil-free air compressor all-in-one machine helps dental clinics reduce the failure rate of mobile phones!

Dental compressor uses a dental drill to remove the diseased tissue of dental caries, and "polish" the caries site into a caries cavity that can be filled with good materials and finally achieve the use effect. Before refilling the material, the cavity should be thoroughly disinfected to prevent further caries.?

The filling materials shall be prepared and filled into the caries cavity, and the contour shall be carved immediately. Attention shall be paid to removing the part that is too high beyond the occlusal surface to avoid iatrogenic occlusal trauma. Most common filler materials contain water as solvent and need to be dried during use.??

The three use guns are used for water spraying, air spraying and spray. They are often used to clean the residue on teeth, and also to air dry teeth. If the tooth is filled, the tooth must be dry before filling the material. Generally, compressed air will be used to blow it dry.

1. One driven one dental chair electric air compressor

2. Powerful, low-noise, 32L silent air compressor

3. The air tank is made of 3mm thick steel, solid and safe

4. Metal water inlet pipe, durable, fast heat dissipation

5. It conforms to safety standards, is not easy to heat up, and is more safe

6. Effectively prolong the service life of the handpiece

Dental compressor features:

The air receiver of dental compressor is made of 3mm steel, which is firm and safe.

Dental compressor, perfect welding technology and exquisite painting processing technology meet the process requirements.

The performance is stable, and the noise meets the requirements for gas supply in quiet places.

The power cord with copper wire diameter ensures compliance with safety standards, less heating and more safety control.

The inner tube is made of metal, with fast heat dissipation and durability.

characteristic:

The air receiver is made of 3mm thick steel, solid and safe; The solenoid valve and capacitor have built-in motor base to avoid damage during transportation; Stable performance, and the noise meets the requirements of gas supply in quiet places; The solenoid valve and capacitor have built-in motor base to avoid damage during transportation