1. Before installing the dental handpiece, click the foot switch to spray the residual air and water out of the tube, and observe whether the air and water out are normal;

2. Installation of dental handpieces and burs: a screw type: install the dental handpiece on the treatment table, install the burs, and gently screw it with the handpiece key. Do not use too much force, but just put it in place. Button type (gland type): press the button on the handset head tightly to load and unload the bur, and release the button to clamp the bur. After installing the bur, manually test whether it is qualified.

3. Click the foot switch to adjust the water flow to the appropriate flow rate, and adjust the air pressure to the appropriate pressure. The standard pressure of high-speed handpiece is 0.2-0.234. Note: It is strictly forbidden to step on the foot switch before the dental handpiece is loaded with the bur, otherwise the three lobe spring will rotate out, pushing the back cover and damaging both.

in use

1. During the use of dental handpieces, care must be taken to be careful, careful and slight. Rough operation is strictly prohibited. Do not drop the handpieces to the ground; 2. No matter how the angle is, it should follow the way of lifting up and down to operate, so as to touch gently, jog, and never use lateral force.

3. The improved pen holding dental handpiece is used to find a stable fulcrum and operate intermittently.

4. According to the different dental tooth position and the shape of the prepared hole, replace the handpiece and the burs in time to minimize the wear of the handpiece bearing.

5. To use sharp burs, blunt burs not only take time and effort, but also cause damage to handpieces, and also increase the pain of patients.

6. In the process of using the handpiece, always check whether the bur is loose to avoid flying burs.

7. Choose different handpieces according to different clinical situations (such as the use of mini mobile phones that do not affect the vision in the posterior dental pulp opening; the use of high torque handpieces with strong strength in dental preparation) 8. The one-time workload is too large, and two mobile phones should be used in turn, to avoid damage to the mobile phone due to excessive load, and to save the time for handpiece replacement.

9. The handpiece rotor swings severely in the radial direction. It is strictly prohibited to use the handpiece when it moves longitudinally. It is strictly prohibited to use the handpiece when there is no water or lack of water.

10. The air pressure and water pressure will change with the use of the treatment table. Therefore, the air pressure and water pressure should be checked frequently during clinical operation to ensure the normal use of the handpiece.

1. Small drawers are added to the dental handpiece lubricant device to collect new oil stains, making cleaning more convenient.

2. The dental handpiece lubricant device has added a digital screen, which allows you to select the working time of each working head at a glance.

3. A pressure reducing valve and a pressure gauge head are added to the dental handpiece lubricant device for cleaning and maintenance under normal pressure.

Add small drawers to collect new oil stains, which is more convenient to clean. The digital screen is added, which can select the working time for each working head at a glance. Air pressure reducing valve and pressure gauge are added to clean and maintain the handpiece under normal pressure.

Foshan Duoyimei Medical Equipment Co., Ltd. was established on December 24, 2007.

We focus on the R&D, production, sales and service of dental instruments. The products are used in major hospitals, dental clinics, dental schools, etc. The product is positioned in the middle and high-end market, with the sales proportion of 60% in the domestic market and 40% in the foreign market. The main products include dental chair, dental handpiece, dental sewage treatment system, dental compressor, light curing machine, negative pressure equipment, sewage treatment equipment, dental negative pressure system, dental handpiece lubricant device, dental diamond burs, etc. The company is committed to creating a one-stop service platform for dental equipment to serve more dentists.

1. Before installing the dental handpiece, click the foot switch to spray the residual air and water out of the tube, and observe whether the air and water out are normal;

2. Installation of dental handpieces and burs: a screw type: install the dental handpiece on the treatment table, install the burs, and gently screw it with the handpiece key. Do not use too much force, but just put it in place. Button type (gland type): press the button on the handset head tightly to load and unload the bur, and release the button to clamp the bur. After installing the bur, manually test whether it is qualified.

3. Click the foot switch to adjust the water flow to the appropriate flow rate, and adjust the air pressure to the appropriate pressure. The standard pressure of high-speed handpiece is 0.2-0.234. Note: It is strictly forbidden to step on the foot switch before the dental handpiece is loaded with the bur, otherwise the three lobe spring will rotate out, pushing the back cover and damaging both.

in use

1. During the use of dental handpieces, care must be taken to be careful, careful and slight. Rough operation is strictly prohibited. Do not drop the handpieces to the ground; 2. No matter how the angle is, it should follow the way of lifting up and down to operate, so as to touch gently, jog, and never use lateral force.

3. The improved pen holding dental handpiece is used to find a stable fulcrum and operate intermittently.

4. According to the different dental tooth position and the shape of the prepared hole, replace the handpiece and the burs in time to minimize the wear of the handpiece bearing.

5. To use sharp burs, blunt burs not only take time and effort, but also cause damage to handpieces, and also increase the pain of patients.

6. In the process of using the handpiece, always check whether the bur is loose to avoid flying burs.

7. Choose different handpieces according to different clinical situations (such as the use of mini mobile phones that do not affect the vision in the posterior dental pulp opening; the use of high torque handpieces with strong strength in dental preparation) 8. The one-time workload is too large, and two mobile phones should be used in turn, to avoid damage to the mobile phone due to excessive load, and to save the time for handpiece replacement.

9. The handpiece rotor swings severely in the radial direction. It is strictly prohibited to use the handpiece when it moves longitudinally. It is strictly prohibited to use the handpiece when there is no water or lack of water.

10. The air pressure and water pressure will change with the use of the treatment table. Therefore, the air pressure and water pressure should be checked frequently during clinical operation to ensure the normal use of the handpiece.

1. Small drawers are added to the dental handpiece lubricant device to collect new oil stains, making cleaning more convenient.

2. The dental handpiece lubricant device has added a digital screen, which allows you to select the working time of each working head at a glance.

3. A pressure reducing valve and a pressure gauge head are added to the dental handpiece lubricant device for cleaning and maintenance under normal pressure.

Add small drawers to collect new oil stains, which is more convenient to clean. The digital screen is added, which can select the working time for each working head at a glance. Air pressure reducing valve and pressure gauge are added to clean and maintain the handpiece under normal pressure.

Foshan Duoyimei Medical Equipment Co., Ltd. was established on December 24, 2007.

We focus on the R&D, production, sales and service of dental instruments. The products are used in major hospitals, dental clinics, dental schools, etc. The product is positioned in the middle and high-end market, with the sales proportion of 60% in the domestic market and 40% in the foreign market. The main products include dental chair, dental handpiece, dental sewage treatment system, dental compressor, light curing machine, negative pressure equipment, sewage treatment equipment, dental negative pressure system, dental handpiece lubricant device, dental diamond burs, etc. The company is committed to creating a one-stop service platform for dental equipment to serve more dentists.